Ana içeriğe geç
Yardım

Oculus Quest 2 Disassembly

Adım 13 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Disconnect the ZIF connectors for the top cameras

The ZIF connector is shown in the second picture. A spudger should be used to push up the locking flap as shown by the red arrow.

When the flap is open the ribbon cable may be pulled from the connector.

Remember to do both camera ZIF connectors.

When reassembling, note that the camera covers are unique to each side. The holes in the covers should be pointed up and in the proper location.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.