Öğrenci Katkılı Viki
Bu vikiyi, eğitim programımızdan harika bir öğrenci ekibi yaptı.
Watch Doesn't Hold a Charge
The Moto 360's battery life is not what it used to be.
Watch Won't Charge
Check that the watch is properly situated on the charging dock. The watch should sit in a way that the power button rests on top of the watch.
If the watch is correctly situated and still does not charge, the charging station may need to be replaced.
Watch is Overcharged
Like any rechargeable device, the Moto 360 can lose battery life if left on the charger for too long. Take care not to leave your device on the charger after it has reached 100% battery. In the case that the battery life is too poor, refer to this battery replacement guide for information on replacing a Moto 360 battery.
Screen Won't Light Up
When the power button is depressed, the screen does not turn on.
Battery is Dead
Place the watch on the power dock with the power button facing the sky. The screen should power on with the time and an indicator of the watch's charge.
Power Button is Broken
Make sure nothing is obstructing the button from being completely depressed. Check for dirt or grime surrounding the button and scrape out/remove to the best of your ability. Take care not to use water or other liquids around openings in the watch. If this does not resolve the issue, the power button may need to be replaced or cleaned.
Screen is Not Displaying Properly
Most of the screen lights up, except for one or a few small spots.
Dead Pixel on the Screen
Make sure there is nothing on the screen such as dirt or other small objects. If the screen is clean and there is still a dead pixel, take a small, blunt object and apply pressure to the dead pixel. Take care not to scratch or otherwise harm your screen. If this still does not fix the problem, consult the display replacement guide for information on replacing the screen.
Watch Cannot Receive Voice Commands
"I've been talking to my watch, but it doesn't respond to my voice. DOES ANYONE LOVE ME?!"
Dirt or Other Obstructions in the Way
Thoroughly clean the exterior of your device. Make sure no dirt or dust is on the device. Speak in a clear, firm tone. If the device still does not respond, remove the back panel and clean the interior of the device. Take care not to get any electronics wet. Canned air is the best way to clean the Moto 360's interior.
Watch is Not Recognized by Computer
The Moto 360 doesn't connect or sync with my computer.
USB Port is Not Working
USB ports, if damaged, will not recognize a device in them. Plug in a flash drive or other USB device to ensure that the port works.
Drivers are Missing
If the device drivers are out of date and need to be updated, the computer will not recognize the device and will not allow data transfer. Search Google to find the most recent and updated drivers.
Ekip
Cal Poly, Team 17-32, Amido Winter 2015 Cal Poly, Team 17-32, Amido Winter 2015 üyesi
CPSU-AMIDO-W15S17G32
4 Üyeler
18 adet Kılavuz yazıldı
17 Yorum
USB port? Is this the new Moto 360 they havent announced yet?
subvertz - Yanıt
Hello. Im having a problem with my moto 360 cognac leather won't work. I was using the chronometer and suddenly it is not working. I did not noticed it until a I tried to checked the chronometer.
It seems to be off and the battery was good
dilindaother2004 - Yanıt
Hello, can anyone tell me why my screen went from blue to red while it's on the charger. I am talking about the charging screen that has time and the circle that indicates how much charge is left has turned red.
James Farias - Yanıt
If you swipe down, the color changes and cycles through the 5 or 6 colors.
Elijah Roberts -
moto 360 1st gen. will not stay on for more than 5minutes after it show a full charge
won7045 - Yanıt
I have the same problem. Seems to work fine. For 5 minutes.
Mike Dean -
My Moto 360 1st gen works 'til 50% than it dies. Does this watch have two separate batteries inside? Or is there something about the recognition of battery size on the new Android 6?
Rodrigo Souza - Yanıt
Ok im gonna post this here since it took me a while to realise the problem after buying 2 extra chargers.
The only thing you have to do is get a fan and put it next or under your moto 360! This watches are awesome but as soon as wheater gets worm they ll stop charging just add the fan and no.more issues to charge.
Benicapo - Yanıt
What do you mean that weather gets worm?
Heli Fan Ensenada -
My Moto 360 1st Gen, is suddenly powering off, when I turn it on I notice that has charge, any suggestions to identify what is wrong?
edgarcallejas - Yanıt
i have the same problem with mine
Andrew Goodwin (Andy) -
My moto 360 2nd gen won't charge in any of the wireless chargers (including its own charging dock) , i tried charging another watch on the same charger and it works , so its some problem with the watch itself.
The watch used to work fine since it ran out of power , and then i started having problems with charging , so it might be some problem with the charging part
Can anyone figure out what it could be? Please.
Abhinav G Nath - Yanıt
Can someone please tell me why my Moto 360 will not hold a charge ? As soon as I take it off the charger it’s dead
Frenited - Yanıt
My moto 360 doesn’t turn on. When kept on charger, the charger led lights up but the watch stays off. Even don’t get any charging info on the screen.
Yatin Somvanshi - Yanıt
Just got the moto 360 3rd generation. It takes forever to get it to charge. It will first drain the battery then I have to plug then unplug a couple of times before it starts to change. Then it takes a few hours to charge. It's less then a month old
radesoto - Yanıt
My watch is not recording steps. Any thoughts? The sensors on the back are clean
Martha Tomasi - Yanıt
My motorola 360 gen 2 watch when I turn it on I get these four circular characters on the screen and it stays there nothing else happens the touch screen doesn't work and every time I turn it off then on it does the same thing?
Raphael J Santana - Yanıt