Ana içeriğe geç

İçindekiler

DVD player won't turn on

Check Plug

  • If your device is not working, make sure the device is plugged in. If the device is plugged in and still not working, unplug the device and see below for guides on fixing your DVD player.

Broken power supply

  • If your power supply is broken, it could be due to a blown fuse. Refer to our guide here for a guide on replacing the power supply and the fuse.

Audio and video problems

Menu items can't be selected

  • Press the STOP button twice before selecting the system menu. Depending on the DVD, it is important to be aware that certain menu items will not always be selectable.
  • Your remote or the buttons on the player may not be working- see below for repair information.

Distorted or no picture

  • Make sure the proper input/output cables are plugged into the correct ports- red cord into the red port, yellow cord into the yellow port, white cord into the white port.
  • Check your TV settings to ensure that it is on the proper mode.
  • Sometimes a small amount of distortion may appear due to the disc. This is not a problem with the player. This would likely be evidenced by very occasional skipping issues.
  • The DVD may be dirty or scratched- insert a clean DVD to make sure it isn't just the disc.
  • The disc reading lens may be dirty or damaged- see our repair guide here. Most likely the symptoms of this would be that the picture is skipping and stopping randomly.
  • The video output port may be damaged- see our repair guide here. If your picture is fuzzy/oddly distorted or the color is incorrect, this is most likely your problem. Note: to repair the output port you must remove the motherboard.
  • It is possible that your motherboard needs to be replaced, see our repair guide here.

Distorted or no sound

  • Make sure the audio cables are plugged into the proper ports on the player and the TV.
  • Check your speakers to ensure functionality. You can do this by playing your TV normally.
  • Your audio output port may be damaged- see our repair guide here. Note: to repair the output port you must remove the motherboard.
  • It is possible that your motherboard needs to be replaced, see our repair guide here.

Disc issues

Disc tray won't come out

  • Physically make sure there is nothing in front of the disc tray preventing ejection.
  • Check that the player has power (see above).
  • The disc tray ejection motor may be damaged- see our repair guide here.

Disc can't play

  • Eject the disc and make sure the disc label is facing up.
  • Check that the disc is defective by trying another disc.
  • Check that is the proper kind of disc (MP3, Picture Disk, Standard DVD) but not Blu-Ray or HDDVD.
  • Check the disc's region code on the back of the DVD case. It must be [1] or [All].
  • If you were making a DVD or CD on your computer, make sure that the DVD-R or CD-R is finalized after being burnt.
  • If all of the above do not apply, there may be a lens issue- see our repair guide here.
  • It is possible that your motherboard needs to be replaced, see our repair guide here.

Player gives "No Disc" error with disc inserted

  • Check that the disc is a format the DVD player can play (not Blu-Ray or HDDVD).
  • Make sure disc label is face up.
  • If all of the above do not apply, there may be a lens issue- see our repair guide here.

Remote doesn't work

  • Check remote battery (replace if necessary). To make sure the remote is working, point it at a cell phone camera and press buttons on the remote. Through the cell phone camera you should see a light flashing from the infrared transmitter at the end of the remote.
  • Clean all buttons and remove dirt and grime.

Player doesn't respond to remote control

  • Check the remote batteries.
  • Point the remote directly at the sensor at the front of the DVD player.
  • Get closer to the player.
  • Check remote functionality (see above).

Buttons don't work

  • To completely reset the player, unplug the player from AC power for 5-10 seconds and plug back in to finish the reset.
  • If nothing works, there may be a wiring issue with the buttons on the player or possibly a bad motherboard. See our repair guide here.

Nathan Klammer

Üyelik tarihi: 10/06/11

476 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 21-20, Maness Fall 2011 Cal Poly, Team 21-20, Maness Fall 2011 üyesi

CPSU-MANESS-F11S21G20

4 Üyeler

7 adet Kılavuz yazıldı

19 Yorum

Hi,ive got a phillips home theater surround,hts3530 model.it keeps cutting out the sound,when it goes it sounds like a eletrical surge noise.sounds like its earthing out.then you have to switch it off,then it might come back on once turned on again...pls help...

tcjmcghee - Yanıt

Hi, my Philips Bluray won't power on. When you push the power botton it just says STARTING and won't change from that, won't come up. Just STARTING and nothing more. Please help!!!

Great Josh - Yanıt

Mine is doing the same thing right now and I don't know how to fix it. Did you get yours fixed? If so can you tell me how?

Tatyana D Morgan -

Same here. Did you ever find a fix for it?

Mary Ryan Roman -

Hello. I have a Philips Home Theatre system. The DVD player reads CDs but doesn't want to read any format of DVD. Any ideas what the problem can be?

Philip Smith - Yanıt

Good morning . I've paid for two blue ray players and and it just keeps on stoping turning off and turning back on while watching a movie I took the player back to the store thinking they were defective and they are still doing it. BDP285

Anderson7528 - Yanıt

I have a brand new DVD player that keeps saying 'wrong region' whenever I put a legit DVD in. It plays pirated ones! I know I have to change the region code but how?

Kay Peters - Yanıt

My Philips blu-ray BDP2180 started to freeze after i Updated it and it get´s stuck on the Philip logo screen.Can´t turn it off or anything else the only thing that works is the Eject button on the Remote?

Bob Sveegerson - Yanıt

My Phillips DVD Blu Ray remote would not function, and since there is not a full option for operation on the machine itself I could not use the DVD player at all. I thought it was needing new batteries for the remote; but that was not a fix.

So, very skeptically, I followed some of the advice and ideas on this website - I turned off the TV connection which turned off the DVD player; then I also unplugged the player for about 20 seconds. Then turned everything on again and the remote and Blu Ray Player were just like new and operate fine.

Call me pleasantly surprised!

Bill Edwards - 05/07/2019

easycr60 - Yanıt

My Phillips dvd player keeps ejecting while playing dvds everything is working fine then it will just cut out and open . Now it gets stranger than that as I only bought this dvd player yesterday as I have a built in dvd player in the TV that started doing exactly the same problem is it possible a dvd could be causing this problem and can I fix the dvd player

big-f-l-y - Yanıt

how can I adjust the picture to “screen fit “?

Yearwood - Yanıt

My blue ray surround player just says Philips but won't start up to do anything with it. It use to make a sound like a motor was starting up. It doesn't do that now. Anyone else have this problem?

Melinda Allred - Yanıt

My Phillips dvd player keeps saying: no disk inserted. Any suggestions?

Melodie James - Yanıt

My Phillips wont play blu-rays it may turn on Just fine one moment and play then later same movie itll say disc not supported refer to owners manual but plays the standard DVDs just fine everytime

April - Yanıt

I just bought a Phillips blue ray player. It powers on but….only if hdmi cable is not plugged in to TV. Plug cable back into TV it stays and responds to remote or push buttons. Turn off…again will not turn on until hdmi cable is unplugged. Returned the play, exchanged for a new one. Returned the cable, exchanged for a new one. Same thing! WTH?

.all HDMI ports function properly with other devices so I’m assured it isn’t the TV either.

Kevin - Yanıt

Mere pass philips hts 5530 model dvd home theater system hai wo on to ho raha hai par uska touch penal kam nahi kar raha hai mujhe wo repair karana hai

Dinesh kuntal PRIYA LOVE - Yanıt

My blu-ray player won't let me push play on the DVD player. And the remote quit working. I put brand new batteries in it and nothing. I bought a cheap DVD player and it has lasted longer than my blu-ray.

Ray Spracklen - Yanıt

Hi My movie Will only go the the main menu and then it won't play

Aaaaaa - Yanıt

Hi I've got a little bit older 2 screen Philips portable dvd player the screen lights disc plays but no images on screen

Justicesmovie player - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 26

Son 30 gün: 89

Her zaman: 90,377